6 x 1-1/8-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk

Bugle Head - Grabber - #2 Phillips

ZOOM

6 x 1-1/8-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk
200

Features:
Attaches gypsum board and wood to wood. Extra sharp, single lead 23° GRABBER point, penetrates quickly. Sharper threads make driving...

Additional product features

Screws Made in U.S.A. also available

Bulk Box 5lb Box 1lb Box Mini Pack

Item No.	Description

100	6 x 1-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 10,000)
200	6 x 1-1/8-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 10,000)
300	6 x 1-1/4-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 8,000)
400	6 x 1-5/8-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 5,000)
500	7 x 2-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 3,500)
600	7 x 2-1/4-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 3,000)
900	8 x 2-1/2-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 2,500)
1100	8 x 3-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 2,000)
1200	10 x 3-1/2-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 1,000)
1300	10 x 4-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 1,000)

Product Features

Attaches gypsum board and wood to wood. Extra sharp, single lead 23° GRABBER point, penetrates quickly. Sharper threads make driving easier and provide better holding power. Standard bugle head.

Specifications:
Gauge: #6
Length: 1-1/8-in
Head Type: Bugle
Recess Type: #2 Phillips
Thread Type: Single lead
Coating: Phosphate

Installation Guidelines:

Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 2500 RPM.

The Bugle head is fully seated when the head is flush with the work surface.
Overdriving may result in failure of the fastener or stripout of the
work surface.
For wood to wood connections, minimum penetration should be 7 diameters (e.g. 1-1/4” for #8 fastener)

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.