Deck Solutions
|
Fastener Solutions
|
Acoustical Solutions
|
|
|
Attaches gypsum board or wood to wood or 25-20 ga. steel or wood. Standard bugle head. With a super sharp 23° Streaker point and 15 threads per inch, you get quick and easy penetration into wood or 20-25 gauge metal studs.
Specifications:
Gauge: #6
Length: 1-in
Head Type: Bugle
Recess Type: #2 Phillips
Thread Type: Twin lead
Coating: Clear Zinc
Installation Guidelines:
Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.
- The head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out.
- The fastener must penetrate beyond the metal three full thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. 
|
|