Specifications:
Gauge:                #6
Length:               1-1/4-in
Head Type:          Pan
Recess Type:       #2 Phillips
Thread Type:       Single lead
Coating:              Gray Phosphate

Installation Guidelines:

Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 2500 RPM.

• The Bugle head is fully seated when the head is flush with the work surface.
• Overdriving may result in failure of the fastener or stripout of the
• work surface.
• Coarse thread screw for temporarily fastening one layer of drywall to another

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASME B18.6.1, as referenced in ICC ER report ER-5280, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.  ©2012 GRABBER Construction Products, Inc. GRABBER®, STREAKER®, DRIVALL®, LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of Grabber Construction Products, Inc.