|
Deck Solutions
|
Fastener Solutions
|
Acoustical Solutions
|
|
|
Attaches light gauge metal to metal where high torque is required. With a super sharp 23° Streaker® point and 15 threads per inch, you get quick and easy penetration into 20-25 gauge metal studs.
Specifications:
Gauge: #7
Length: 7/17-in
Head Type: Pan framing
Recess Type: #2 Phillips
Thread Type: 15 TPI Twin lead
Coating: Gray phosphate
Installation Guidelines:
Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.
- The pan head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1002, as referenced in ICCES report ER-5280 are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.
|
Customers who purchased
7 x 7/16-in, Pan Head, Fine Thread, Phillips, 15TPI, Phosphate, 1-lb,
also purchased:
8 x 2-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk
12 x 3/4-in, Hex Head, Drill Point, Clear Zinc, 5-lb
6 x 7/16-in, Pan Head, Drill Point, Phillips, Clear Zinc, 1-lb
|