US CA EU

Catalogs
Deck Solutions Catalog
Deck Solutions
Fastener Solutions Catalog
Fastener Solutions
Acoustical Solutions Catalog
Acoustical Solutions
 
You Are Here: Fastener Solutions > Screws > 10 x 3/4-in, Hex Head, Drill Point, Clear Zinc, 1-lb


Hex Head - Drill, S-12 - Hex

ZOOM 1 
10 x 3/4-in, Hex Head, Drill Point, Clear Zinc, 1-lb
X10075H3
Features:
Attaches heavy gauge 20-8 ga. metal to metal. Hex head framing screw used in heavy gauge metal to metal applications where high torque...

 
X10075H3 10 x 3/4-in, Hex Head, Drill Point, Clear Zinc, 1-lb (Approx. Pcs. 169)
X12075H3 12 x 3/4-in, Hex Head, Drill Point, Clear Zinc, 1-lb (Approx. Pcs. 129)
Attaches heavy gauge 20-8 ga. metal to metal. Hex head framing screw used in heavy gauge metal to metal applications where high torque is required. 

Specifications:
Gauge:                #10
Length:               3/4-in
Head Type:          Hex framing
Thread Type:       Single lead
Coating:              Clear zinc

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.
  • The hex head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out of the work surface.
  • The fastener must penetrate beyond the metal three full thread pitches.

Hydrogen Embrittlement:
Grabber’s 10, 12 & 14 gauge zinc-plated drill point fasteners are manufactured in ISO 9002 factories, plated as prescribed in the ASTM F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners, and post-plating baked according to the process articulated in SAE AMS 2759/9, Hydrogen Embrittlement Relief (Baking) of Steel Parts, Section 3.3.3.1, and SAE J78, which calls for a four-hour minimum time for baking out entrapped hydrogen after acid treating the parts.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.

certifications

prop65""


My Account
Email:
Password:
Forgot
password?
 
New to Grabberman.com?
Create new account
Shopping Cart
You have 0 items in your cart.

View Cart

Subtotal: $0.00


Special Promos