Deck Solutions
|
Fastener Solutions
|
Acoustical Solutions
|
|
|
You Are Here: |
Fastener Solutions > Screws > 14 x 4-1/2-in Flat Head, Type 17 Point , Star Recess, Galvanized, Bulk (Approx. Pcs. 500) |
Tie-Master multi-purpose wood fastener for general wood construction such as ledger boards, laminated beams, under-deck connections, trusses and dimensional lumber, decks, docks and boardwalks. Featuring flat #40 Star head countersinking design for flush finish and draw-tite shank pulling members tight together. Type 17 cutter point eliminates pre-drilling in. Mechanical galvanized exterior coating for corrosion resistance.
Features:
- 14 x 4-1/2-in
- Head seats flush and does not protrude above the wood surface.
- Pulls both wood members together for a secure fastening job.
- No need to pre-drill
- TIE-MASTER™ Structural Screw
- Wood to Wood
- Powerful star 40 recess
- ICC compliant - ICC-ESR#3531
Performance Data:
Application: Structural
- Wood to wood construction
- Decks, Docks & Boardwalks
- Retaining walls
- Laminated beams
- Retaining walls
- Rim to joist
- Joist and ledger
- Under-deck connections
Compliance with the following codes:
- 2015, 2012, 2009 International Building Code® (IBC)
- 2015, 2012, 2009 International Residential Code® (IRC)(IBC)
- All local code requirements must be followed and a design professional should be consulted for proper spacing requirements.
- BEND YIELD 150,000 (psi)
Tie-Master is a structural corrosion resistant heavy duty wood screw recognized by ICC in ESR 3531 for applications such as, landscape timbers, fences, decks, headers, stair ringers, attaching rafter or trusses to the top plate and more. Tie-Master fasteners may be used in place of ¼” and 3/8” lag screws and is code approved for use in treated lumber. Its friction reduction exterior coating, type 17 point and aggressive 10 TPI threads zip right into the densest woods.
Tie-Master timber fasteners are mechanically galvanized coated against corrosion B695 Class 55. Grabber’s galvanized coating is ACQ compliant, and may be used in place of Hot Dipped Galvanized products as described ASTM A153.
|
|