US CA EU

Catalogs
Deck Solutions Catalog
Deck Solutions
Fastener Solutions Catalog
Fastener Solutions
Acoustical Solutions Catalog
Acoustical Solutions
 
You Are Here: Fastener Solutions > Screw Selector > Grabber Cement Board Driller


Thin Wafer Head - #3 Drill - #2 Phillips

ZOOM 1 
8 x 1-1/4-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk
GCB8125SD
Features:
Grabber Cement Board and High Density Sheathing Screws have been specifically designed for use with Cement board and High density exterior...

 
Bulk Box 5lb Box 1lb Box Mini Pack
Item No. Description
GCB8125SD 8 x 1-1/4-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 5,000)
GCB8158SD 8 x 1-5/8-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 4,000)
GCB8238SD 8 x 2-3/8-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 3,000)
GCB10350SD 10 x 3-1/2-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 1,000)
Grabber Cement Board and High Density Sheathing Screws have been specifically designed for use with Cement board and High density exterior sheathing. These exterior grade GrabberGard corrosion resistant fasteners have a .40” (10.5mm) wafer head with nibs to facilitate seating and minimize strip out. Grabber drill point screws are for use for the attachment of these boards to steel from 20 to 14 gauge.

Grabber Cement Board Screws meet the USG Durock specification for minimum head diameter of 0.400”.

Specifications:
Gauge:                #8
Length:               1-1/4-in
Head Type:          Flat wafer with counter sinking nibs
Head Diameter:    .40 inch
Recess Type:       #2 Phillips
Thread Type:       Single lead
Point:                  Drill point
Coating:              GrabberGard® superior corrosion protection.

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 4000 RPM.

  • Install with head flush with board, not need to counter sink.
  • Overdriving may result in failure of the fastener or strip out of the
  • work surface.

GrabberGard exterior grade coating
GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. The distinguishing feature of GrabberGard® is the joining and encapsulation the substrate with the fused organic surface coating. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C954, as referenced in ICCES report ER-5280 and ESR 1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.

certifications

My Account
Email:
Password:
Forgot
password?
 
New to Grabberman.com?
Create new account
Shopping Cart
You have 0 items in your cart.

View Cart

Subtotal: $0.00


Related Items
Customers who purchased 8 x 1-1/4-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk, also purchased:

8 x 1/2-in, Wafer Head, Super Point, Phillips, Clear Zinc, Bulk

8 x 1-5/8-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk
Special Promos