Deck Solutions Catalog
Deck Solutions
Fastener Solutions Catalog
Fastener Solutions
Acoustical Solutions Catalog
Acoustical Solutions
You Are Here: Product Detail

Flat Pan Head - #3 Drill - LOX #2
Fastener Classification
Heavy Gauge Metal (18 or thicker)
Fastener Head
Flat Pan
Fastener Drive
LOX #2
Fastener Length
Fastener Gauge
Fastener Point
#3 Drill
Fastener Package Type
Packaged Screws
Fastener Package Weight
Bulk Box
Approx. Pcs.
Fastener TPI
Fastener Coating
Clear Zinc
Fastener Color
Related Items  
Item No. Description
FP121878JBWZ 12 x 7/8-in, Flat Pan Head, Drivall®, LOX®, 18TPI, Clear Zinc, Bulk (Approx. Pcs. 6,000)

Designed for pre-fabrication of trusses, steel studs to track (20-8 gauge), steel studs to door frame jamb anchor clips and heavy gauge steel to steel framing.

Self tapping drill point is designed for penetration into heavy gauge metal. LOX® recess drive does not require a magnetic bit tip holder. Flat Pan head provides a flat bearing surface.


Gauge:                #12
Length:               7/8-in
Head Type:          Pan framing
Recess Type:       LOX® 2
Thread Type:       Single lead
Coating:              Clear zinc

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.

  • The flat pan head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out of the work surface.
  • The fastener must penetrate beyond the metal three full thread pitches.

LOX® Recess 8 points of drive contact:
LOX drive technology was created to solve the problems of all the other recess types.  The sure-fit bit and 8 points of contact create a unique torque maximization that utilizes the full power of your power tool.  The LOX recess requires much less effort to drive.  The recess is much less likely to strip out as compared to other recesses.  It is the only technology that gives you extended bit life and gives consistent results drive after drive.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.



My Account
New to
Create new account
Shopping Cart
You have 0 items in your cart.

View Cart

Subtotal: $0.00

Related Items
Customers who purchased 12 x 7/8-in, Flat Pan Head, Drivall®, LOX®, 18TPI, Clear Zinc, Bulk, also purchased:

#2 LOX Double End Bit - 5 Pack

Rocker Screw Gun 4025
Special Promos