6 x 2-in, Bugle Head, Fine Thread, Phosphate, Bulk

Bugle Head - Streaker - #2 Phillips

ZOOM

6 x 2-in, Bugle Head, Fine Thread, Phosphate, Bulk
768

Features:
Attaches gypsum board to wood or light gauge steel. With a super sharp 23° Streaker point and 15 threads per inch, you get quick and easy...

Additional product features

Screws Made in U.S.A. also available

Bulk Box 5lb Box 1lb Box

Item No.	Description

168	6 x 1-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 10,000)
268	6 x 1-1/8-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 10,000)
368	6 x 1-1/4-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 8,000)
468	6 x 1-5/8-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 5,000)
768	6 x 2-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 3,500)
868	7 x 2-1/4-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 3,000)
968	8 x 2-1/2-in, Bugle Head, Fine Thread, Streaker®, Phosphate, Bulk (Approx. Pcs. 2,500)
1168	8 x 3-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 2,000)
1268	10 x 3-1/2-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 1,000)
1368	10 x 4-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 1,000)
1468	10 x 4-1/2-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 1,000)
1568	10 x 5-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 1,000)
1768	10 x 6-in, Bugle Head, Fine Thread, Phosphate, Bulk (Approx. Pcs. 1,000)

Product Features

Attaches gypsum board to wood or light gauge steel. With a super sharp 23° Streaker point and 15 threads per inch, you get quick and easy penetration into wood or 20-25 gauge metal studs.

Specifications:
Gauge:                #6
Length:        2-in
Head Type: Bugle
Recess Type: #2 Phillips
Thread Type: Twin lead
Coating:          Gray phosphate

Installation Guidelines:
Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.

The head is fully seated when the head is flush with the work surface.
Overdriving my result in fastener failure or strip out.
The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.