US CA EU

Catalogs
Deck Solutions Catalog
Deck Solutions
Fastener Solutions Catalog
Fastener Solutions
Acoustical Solutions Catalog
Acoustical Solutions
 
You Are Here: 8 x 3-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 1,000)


Wafer, Type A Head - #3 Drill - #2 Phillips

ZOOM 1 
8 x 3-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk
39Z
Features:
Designed for heavy gauge metal applications where low profile head exposure is desired.  Wafer head provides a greater bearing surface...

 
234Z 8 x 1/2-in, Wafer Head, Super Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 10,000)
34Z 8 x 1/2-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 10,000)
35Z 8 x 1-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 5,000)
235Z 8 x 1-in, Wafer Head, Super Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 5,000)
236Z 8 x 1-1/4-in, Wafer Head, Super Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 5,000)
36Z 8 x 1-1/4-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 5,000)
37Z 8 x 1-5/8-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 4,000)
238Z 8 x 2-1/2-in, Wafer Head, Super Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 2,500)
39Z 8 x 3-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 1,000)
234Z10CW 10 x 3/4-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 5,000)
236Z10CW 10 x 1-1/4-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 3,500)
240Z 10 x 3-1/2-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 1,000)
241Z 10 x 4-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 800)
242Z 10 x 5-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 500)
234Z12CW 12 x 3/4-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 5,000)

Designed for heavy gauge metal applications where low profile head exposure is desired.  Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure. For 20-12 gauge steel.

Specifications:
Gauge:                #8
Length:               3-in
Head Type:          Wafer framing
Recess Type:       #2 Phillips
Thread Type:       Single lead
Coating:              Clear zinc

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.

  • The wafer head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out of the work surface.
  • The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C954, as referenced in ICCES report ER-5280 and ESR 1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.

certifications