Deck Solutions
|
Fastener Solutions
|
Acoustical Solutions
|
|
|
You Are Here: |
8 x 1-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 5,000) |
Designed for heavy gauge metal applications where low profile head exposure is desired. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure. For 20-12 gauge steel.
Specifications:
Gauge: #8
Length: 1-in
Head Type: Wafer framing
Recess Type: #2 Phillips
Thread Type: Single lead
Coating: Clear zinc
Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.
- The wafer head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C954, as referenced in ICCES report ER-5280 and ESR 1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.

|
Customers who purchased
8 x 1-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk,
also purchased:
8 x 1/2-in, Wafer Head, Drill Point, Phillips, Clear Zinc, Bulk
6 x 1-1/4-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk
6 x 1-1/4-in, Scavenger® Head, Drill Point, Clear Zinc, Bulk
|