US CA EU

Catalogs
Deck Solutions Catalog
Deck Solutions
Fastener Solutions Catalog
Fastener Solutions
Acoustical Solutions Catalog
Acoustical Solutions
 
You Are Here: Product Detail


Wafer, Type A Head - Streaker - #2 Phillips

ZOOM 1 
Fastener Classification
Light Gauge Metal (20-25)
Fastener Head
Wafer
Fastener Drive
#2 Phillips
Fastener Length
1"
Fastener Gauge
#8
Fastener Point
Streaker
Fastener Package Type
Packaged Screws
Fastener Package Weight
Bulk Box
Approx. Pcs.
5,000
Fastener TPI
15
Fastener Coating
Clear Zinc
Fastener Color
Gray
 
Bulk Box 5lb Box 1lb Box Mini Pack
Item No. Description
32Z 8 x 1-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk (Approx. Pcs. 5,000)
33Z 8 x 1-1/4-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk (Approx. Pcs. 5,000)
3138Z 8 x 1-1/2-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk (Approx. Pcs. 3,000)
3151Z 8 x 2-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk (Approx. Pcs. 2,500)
3163Z 8 x 2-1/2-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk (Approx. Pcs. 2,500)
3176Z 8 x 3-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk (Approx. Pcs. 1,000)
Designed for light gauge metal applications where low profile head exposure is desired.  Super sharp 23° Streaker® point means quick and easy penetration into metal (25-20 ga.), while wafer head provides greater bearing surface. The right screw for K-lath installation.

Specifications:
Gauge:                #8
Length:               1-in
Head Type:          Wafer framing
Recess Type:       #2 Phillips
Thread Type:        Twin lead
Coating:              Clear zinc

Installation Guidelines:
Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.
  • The wafer head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out of the work surface.
  • The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.

certifications