Deck Solutions
|
Fastener Solutions
|
Acoustical Solutions
|
|
|
You Are Here: |
Product Detail |
Designed for light gauge metal applications where low profile head exposure is desired. Super sharp 23° Streaker® point means quick and easy penetration into metal (25-20 ga.), while wafer head provides greater bearing surface. The right screw for K-lath installation. Superior GrabberGard exterior grade coating provides additional corrosion protection.
Specifications:
Gauge: #8
Length: 9/16-in
Head Type: Wafer framing
Recess Type: #2 Phillips
Thread Type: Twin lead
Coating: GrabberGard® superior corrosion protection.
Installation Guidelines:
Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.
- The wafer head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.
|
Customers who purchased
8 x 9/16-in, Wafer Head, Fine Thread, Phillips, GrabberGard®, Bulk,
also purchased:
8 x 1-1/2-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk
8 x 2-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk
8 x 2-1/2-in, Wafer Head, Fine Thread, Phillips, Clear Zinc, Bulk
|