US CA EU

Catalogs
Deck Solutions Catalog
Deck Solutions
Fastener Solutions Catalog
Fastener Solutions
Acoustical Solutions Catalog
Acoustical Solutions
 
You Are Here: Fastener Solutions > Screws > Vector™ Point Pan Head Streaker®


Pan Head - Vector™ - #2 Phillips

ZOOM 1 
7 x 7/16-in, Pan Head, Vector™ Point, Streaker®, Phosphate, Bulk
23V
Features:
Grabber's new Vector screw significantly reduces drive time and increases productivity with its much sharper and steeper-angled point compared...

 
Bulk Box 5lb Box 1lb Box
Item No. Description
23V 7 x 7/16-in, Pan Head, Vector™ Point, Streaker®, Phosphate, Bulk (Approx. Pcs. 15,000)
Grabber's new Vector screw significantly reduces drive time and increases productivity with its much sharper and steeper-angled point compared to traditional framing fasteners. Competitive tests have demonstrated that Vector point screws drive up to eight times faster than IFI SAE J78 fastener penetration standards and 50% faster than competing fasteners. In a drive comparison with standard framing fasteners, the VectorTM performed considerably better across the board in multiple drive test comparisons.

CUT DRIVING TIME IN HALF
Designed specifically for metal framing, the Vector™ fastener drives through light-gauge metal with ease. Competitive tests compared the Vector™ screw against 9 other fasteners through two layers of 25-gauge metal—and the results were dramatic. The Vector™ screw performs eight times faster than IFI SAE J78 penetration standards—and 50% faster than the average time for other fasteners.

Specifications:
Gauge:                #7
Length:               7/16"
Head Type:          Pan Head
Recess Type:       #2 Phillips
Thread Type:        Twin lead
Coating:              Gray phosphate
Point:                  Vector Point

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 4,000.
  • The pan head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out.
  • The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.

certifications


My Account
Email:
Password:
Forgot
password?
 
New to Grabberman.com?
Create new account
Shopping Cart
You have 0 items in your cart.

View Cart

Subtotal: $0.00


Related Items Special Promos