|
Deck Solutions
|
Fastener Solutions
|
Acoustical Solutions
|
|
|
| You Are Here: |
Product Detail |
Attaches heavy gauge 20-12 ga. metal to metal. Unique grip-tight, high torque pan head design.
Specifications:
Gauge: #6
Length: 7/16-in
Head Type: Pan framing
Recess Type: #2 Phillips
Thread Type: Single lead
Coating: Phosphate
Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.
- The pan head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.
|
Customers who purchased
6 x 7/16-in, Pan Head, Drill Point, Phillips, Phosphate, Bulk,
also purchased:
6 x 7/16-in, Pan Head, Drill Point, Phillips, Clear Zinc, Bulk
|