US CA EU

Catalogs
Deck Solutions Catalog
Deck Solutions
Fastener Solutions Catalog
Fastener Solutions
Acoustical Solutions Catalog
Acoustical Solutions
 
You Are Here: Fastener Solutions > Screws > Bugle Head Driller Grabbergard Exterior Finish


Bugle Head - Drill, S-12 - #2 Phillips

ZOOM 1 
6 x 1-1/4-in, Bugle Head, Drill Point, Phillips, GrabberGard Gray, Bulk
14RG
Features:
Attaches sheathing, insulation board, wood, etc. to metal studs 20-12 ga. Standard bugle head. Superior GrabberGard exterior grade coating...

 
Bulk Box 5lb Box
Item No. Description
14RG 6 x 1-1/4-in, Bugle Head, Drill Point, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 8,000)
15RG 6 x 1-5/8-in, Bugle Head, Drivall®, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 5,000)
16RG 6 x 1-7/8-in, Bugle Head, Drivall®, GrabberGard®, Bulk (Approx. Pcs. 4,000)
30SRG 8 x 2-3/8-in, Bugle Head, Drivall®, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 3,000)
30MRG 8 x 2-5/8-in, Bugle Head, Drivall®, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 2,000)
30LRG 8 x 3-in, Bugle Head, Drivall®, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 2,000)
B10350SDRG 10 x 3 1/2-in, Bugle Head, Drivall®, GrabberGard®, Bulk (Approx. Pcs. 1,000)
B10400SDRG 10 x 4-in, Bugle Head, Drivall®, GrabberGard®, Bulk (Approx. Pcs. 1,000)
B10500SDRG 10 x 5-in, Bugle Head, Drivall®, GrabberGard®, Bulk (Approx. Pcs. 1,000)

Attaches sheathing, insulation board, wood, etc. to metal studs 20-12 ga. Standard bugle head. Superior GrabberGard exterior grade coating provides additional corrosion protection.

Specifications:
Gauge:                #6
Length:               1-1/4-in
Head Type:          Bugle
Recess Type:       #2 Phillips
Thread Type:       Single lead
Coating:              GrabberGard® superior corrosion protection.

Installation Guidelines:

Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 2500 RPM

  • The Bugle head is fully seated when the head is flush with the work surface.
  • Overdriving may result in failure of the fastener or strip out of the
  • work surface.
  • Minimum 2500 rpm 4 amp screwgun recommended.
  • Install screws flush with surface, or with a countersink.

GrabberGard exterior grade coating

GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. The distinguishing feature of GrabberGard® is the joining and encapsulation the substrate with the fused organic surface coating. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films. GrabberGard® treatment does not attribute its anti-corrosion properties to any single material, but the synergy of these two layers, which when combined has superb corrosion resistant qualities. 

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C954, as referenced in ICCES report ER-5280, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.

certifications


My Account
Email:
Password:
Forgot
password?
 
New to Grabberman.com?
Create new account
Shopping Cart
You have 0 items in your cart.

View Cart

Subtotal: $0.00


Related Items Special Promos