US CA EU

Catalogs
Deck Solutions Catalog
Deck Solutions
Fastener Solutions Catalog
Fastener Solutions
Acoustical Solutions Catalog
Acoustical Solutions
 
You Are Here: Fastener Solutions > Screws > 10 x 5/8-in, Pan Head, Drivall®, Phillips, Clear Zinc, Bulk (Approx. Pcs. 7,500)


Pan Head - #3 Drill - #2 Phillips

ZOOM 1 
10 x 5/8-in, Pan Head, Drivall®, Phillips, Clear Zinc, Bulk
10058P3
Features:
Attaches heavy gauge 20-8 ga. metal to metal. Unique grip-tight, high torque pan head design.  Specifications: Gauge:                #10...

 
19Z 6 x 7/16-in, Pan Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 15,000)
20Z 8 x 1/2-in, Pan Head, Drill Point, Phillips, Clear Zinc, Bulk (Approx. Pcs. 10,000)
10058P3 10 x 5/8-in, Pan Head, Drivall®, Phillips, Clear Zinc, Bulk (Approx. Pcs. 7,500)
Attaches heavy gauge 20-8 ga. metal to metal. Unique grip-tight, high torque pan head design. 

Specifications:
Gauge:                #10
Length:               5/8-in
Head Type:          Pan framing
Recess Type:       #2 Phillips
Thread Type:        Single lead
Coating:              Clear zinc

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.
  • The pan head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out of the work surface.
  • The fastener must penetrate beyond the metal three full thread pitches.

Hydrogen Embrittlement:
Grabber’s 10, 12 & 14 gauge zinc-plated drill point fasteners are manufactured in ISO 9002 factories, plated as prescribed in the ASTM F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners, and post-plating baked according to the process articulated in SAE AMS 2759/9, Hydrogen Embrittlement Relief (Baking) of Steel Parts, Section 3.3.3.1, and SAE J78, which calls for a four-hour minimum time for baking out entrapped hydrogen after acid treating the parts.

Grabber’s 10, 12 & 14 gauge drill point fasteners are also tested for hydrogen embrittlement by benchmarks outlined in ASME B18.6.4, section 2.9.1.4, Hydrogen Embrittlement Test, and the SAE J78 4.4.1 Hydrogen Embrittlement Test Criteria, under protocols articulated in ASME B18.18.2 Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.

certifications

My Account
Email:
Password:
Forgot
password?
 
New to Grabberman.com?
Create new account
Shopping Cart
You have 0 items in your cart.

View Cart

Subtotal: $0.00


Related Items Special Promos