US CA EU

Catalogs
Deck Solutions Catalog
Deck Solutions
Fastener Solutions Catalog
Fastener Solutions
Acoustical Solutions Catalog
Acoustical Solutions
 
You Are Here: 6 x 1-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 10,000)


Bugle Head - Grabber - #2 Phillips

ZOOM 1 
6 x 1-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk
100
Features:
Attaches gypsum board and wood to wood. Extra sharp, single lead 23° GRABBER point, penetrates quickly. Sharper threads make driving...

 
100 6 x 1-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 10,000)
200 6 x 1-1/8-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 10,000)
300 6 x 1-1/4-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 8,000)
400 6 x 1-5/8-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 5,000)
500 7 x 2-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 3,500)
600 7 x 2-1/4-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 3,000)
900 8 x 2-1/2-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 2,500)
1100 8 x 3-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 2,000)
1200 10 x 3-1/2-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 1,000)
1300 10 x 4-in, Bugle Head, Coarse Thread, Phillips, Phosphate, Bulk (Approx. Pcs. 1,000)

Attaches gypsum board and wood to wood. Extra sharp, single lead 23° GRABBER point, penetrates quickly. Sharper threads make driving easier and provide better holding power.  Standard bugle head.

Specifications:
Gauge:                #6
Length:               1-in
Head Type:          Bugle
Recess Type:       #2 Phillips
Thread Type:       Single lead
Coating:              Phosphate

Installation Guidelines:

Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 2500 RPM.

  • The Bugle head is fully seated when the head is flush with the work surface.
  • Overdriving may result in failure of the fastener or stripout of the
  • work surface.
  • For wood to wood connections, minimum penetration should be 7 diameters (e.g. 1-1/4” for #8 fastener)

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1002, as referenced in ICCES report ER-5280 are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.

certifications